Reply To: RE: Call still in queue after hang-up

VitalPBX Community Support General Discussion Call still in queue after hang-up Reply To: RE: Call still in queue after hang-up

    tasagore
    Participant

    This is my old dahdi-channels.conf (just one channel, all have the same params):

    ; Span 2: B4/0/1 "B4XXP (PCI) Card 0 Span 1"
    group=0,12
    context=from-pstn
    switchtype = euroisdn
    signalling = bri_cpe
    channel => 5-6
    context = default
    group = 63

    chan_dahdi.conf:

    [trunkgroups]
    [channels]
    context=from-pstn
    signalling=fxs_ks
    rxwink=300              ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    echotraining=800
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1
    ;Uncomment these lines if you have problems with the disconection of your analog lines
    busydetect=yes
    busycount=8
    immediate=no
    language=es
    #include dahdi-channels.conf

    Seems the same configuration posted above in VitalPBX.

    0