Reply To: RE: VitalPBX under NAT

VitalPBX Community Support General Discussion VitalPBX under NAT Reply To: RE: VitalPBX under NAT

    khuyenht
    Participant
    Up
    0
    Down

    @ing-joserivera26

    Hi Mrivera,

    we don’t define Public and private IP in SIP setting, i keep the default setting.

    https://i.imgur.com/R1Fv4nO.png~

    below is our /etc/asterisk/ombutel/sip__10-general.conf

    [general]
    context=sip-default
    udpbindaddr=0.0.0.0:5060
    tcpbindaddr=0.0.0.0:5060
    tlsbindaddr=0.0.0.0:5061
    tlscipher=ALL
    tlsclientmethod=tlsv1
    accept_outofcall_message=yes
    allow=!all,ulaw,alaw,g729,g722,gsm
    allowguest=no

    allowtransfer=yes
    alwaysauthreject=yes
    authfailureevents=no
    autoframing=no
    defaultexpiry=120
    dumphistory=no
    dynamic_exclude_static=no
    faxdetect=no
    g726nonstandard=no
    jbenabled=no
    jbforce=no
    jbimpl=fixed
    language=en
    maxcallbitrate=384
    maxexpiry=3600
    minexpiry=60
    notifycid=no
    notifyhold=no
    notifyringing=yes
    preferred_codec_only=no
    recordhistory=no
    rtpholdtimeout=300
    rtptimeout=30
    sipdebug=no
    srvlookup=no
    tonezone=us
    tos_audio=ef
    tos_sip=cs3
    tos_video=af41
    videosupport=no
    nat=no
    websocket_enabled=true
    autodomain=no
    allowexternaldomains=yes
    tcpenable=no
    tlsenable=no
    tlsdontverifyserver=no
    useragent=VitalPBX
    callcounter=yes
    tos_text=af41
    cos_sip=3
    cos_audio=5

    Could you please help,

    Thank you so much

     

    0