Reply To: RE: VitalPBX with SIP trunk to Cisco 2800 router

VitalPBX Community Support General Discussion VitalPBX with SIP trunk to Cisco 2800 router Reply To: RE: VitalPBX with SIP trunk to Cisco 2800 router

    You may create a trunk on VitalPBX in text mode:

    • First go to the trunks module (PBX >> External >> Trunks)
    • Select the desired trunk Technology (SIP)
    • Click the button labeled “Switch to Text Mode”, located at the left bottom corner.

    Your configuration should look like shown in the attached picture.

    Make sure you have configured the CISCO with VitalPBX’s IP and any other required settings.

    0