Dynamic Routing not working 2.3.8

VitalPBX Community Support General Discussion Dynamic Routing not working 2.3.8

  • Post
    jduraes
    Participant

    Hi,

    i´m trying to use dynamic routing on 2.3.8, but it keeps redirecting my default inbound route

     

    Extension that have called was 7011441188 but it keeps redirecting to inbound route configured extension 300 instead of going to one that made call.

     

    Executing [0001@trk-1-in:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Incoming call through: GOIP1”) in new stack
    — Executing [0001@trk-1-in:2] Set(“SIP/goip1_outgoing-00000ab4”, “CDR(trunk)=1”) in new stack
    — Executing [0001@trk-1-in:3] Set(“SIP/goip1_outgoing-00000ab4”, “DID=0001”) in new stack
    — Executing [0001@trk-1-in:4] Goto(“SIP/goip1_outgoing-00000ab4”, “default-trunk,0001,1”) in new stack
    — Goto (default-trunk,0001,1)
    — Executing [0001@default-trunk:1] Gosub(“SIP/goip1_outgoing-00000ab4”, “set-global-tenant-vars,s,1”) in new stack
    — Executing [s@set-global-tenant-vars:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Setting Global Vars for vitalpbx Tenant”) in new stack
    — Executing [s@set-global-tenant-vars:2] Set(“SIP/goip1_outgoing-00000ab4”, “__TENANT_PATH=6bcf72ea9694d112”) in new stack
    — Executing [s@set-global-tenant-vars:3] Set(“SIP/goip1_outgoing-00000ab4”, “__TENANT_PREFIX=”) in new stack
    — Executing [s@set-global-tenant-vars:4] Set(“SIP/goip1_outgoing-00000ab4”, “__QUEUE_AGENTS_CONTEXT=queue-call-to-agents”) in new stack
    — Executing [s@set-global-tenant-vars:5] Set(“SIP/goip1_outgoing-00000ab4”, “__FOLLOWME_CONTEXT=ext-followme”) in new stack
    — Executing [s@set-global-tenant-vars:6] Set(“SIP/goip1_outgoing-00000ab4”, “__HINTS_CONTEXT=extension-hints”) in new stack
    — Executing [s@set-global-tenant-vars:7] Set(“SIP/goip1_outgoing-00000ab4”, “__DEFAULT_COS=cos-all”) in new stack
    — Executing [s@set-global-tenant-vars:8] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [0001@default-trunk:2] Gosub(“SIP/goip1_outgoing-00000ab4”, “sub-check-blacklist,s,1(6bcf72ea9694d112,0219—93046)”) in new stack
    — Executing [s@sub-check-blacklist:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Testing if 0219—93046 is in Black List”) in new stack
    — Executing [s@sub-check-blacklist:2] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?banned”) in new stack
    — Executing [s@sub-check-blacklist:3] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [0001@default-trunk:3] Gosub(“SIP/goip1_outgoing-00000ab4”, “sub-setup-call-type,s,1(incoming)”) in new stack
    — Executing [s@sub-setup-call-type:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Determinating Call Type”) in new stack
    — Executing [s@sub-setup-call-type:2] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?return”) in new stack
    — Executing [s@sub-setup-call-type:3] Gosub(“SIP/goip1_outgoing-00000ab4”, “s-incoming,1()”) in new stack
    — Executing [s-incoming@sub-setup-call-type:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Incoming Call”) in new stack
    — Executing [s-incoming@sub-setup-call-type:2] Set(“SIP/goip1_outgoing-00000ab4”, “__CALL_TYPE=2”) in new stack
    — Executing [s-incoming@sub-setup-call-type:3] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s@sub-setup-call-type:4] Set(“SIP/goip1_outgoing-00000ab4”, “__CALL_TYPE_CONFIGURED=yes”) in new stack
    — Executing [s@sub-setup-call-type:5] Set(“SIP/goip1_outgoing-00000ab4”, “CDR(calltype)=2”) in new stack
    — Executing [s@sub-setup-call-type:6] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [0001@default-trunk:4] Gosub(“SIP/goip1_outgoing-00000ab4”, “dynamic-routing-in,s,1(0219—93046)”) in new stack
    — Executing [s@dynamic-routing-in:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Test if must to apply dynamic routing”) in new stack
    — Executing [s@dynamic-routing-in:2] Set(“SIP/goip1_outgoing-00000ab4”, “EXTERNAL_CALLER=0219—93046”) in new stack
    — Executing [s@dynamic-routing-in:3] Set(“SIP/goip1_outgoing-00000ab4”, “DYNROUTING_DM=4”) in new stack
    — Executing [s@dynamic-routing-in:4] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?gd”) in new stack
    — Executing [s@dynamic-routing-in:5] Set(“SIP/goip1_outgoing-00000ab4”, “EXTERNAL_CALLER=3046”) in new stack
    — Executing [s@dynamic-routing-in:6] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?:rb”) in new stack
    — Goto (dynamic-routing-in,s,11)
    — Executing [s@dynamic-routing-in:11] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [0001@default-trunk:5] Goto(“SIP/goip1_outgoing-00000ab4”, “incoming-calls,0001,1”) in new stack
    — Goto (incoming-calls,0001,1)
    — Executing [0001@incoming-calls:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “INBOUND_ROUTE: GOIP-CHIP1”) in new stack
    — Executing [0001@incoming-calls:2] Set(“SIP/goip1_outgoing-00000ab4”, “CHANNEL(language)=pt_BR”) in new stack
    — Executing [0001@incoming-calls:3] Set(“SIP/goip1_outgoing-00000ab4”, “CHANNEL(musicclass)=ringback”) in new stack
    — Executing [0001@incoming-calls:4] Gosub(“SIP/goip1_outgoing-00000ab4”, “sub-set-call-vars,s-incoming,1(0219—93046,0001,6bcf72ea9694d112)”) in new stack
    — Executing [s-incoming@sub-set-call-vars:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Setting Incoming Call Vars”) in new stack
    — Executing [s-incoming@sub-set-call-vars:2] Set(“SIP/goip1_outgoing-00000ab4”, “__INCOMING_SOURCE=0219—93046”) in new stack
    — Executing [s-incoming@sub-set-call-vars:3] Set(“SIP/goip1_outgoing-00000ab4”, “__INCOMING_DESTINATION=0001”) in new stack
    — Executing [s-incoming@sub-set-call-vars:4] Set(“SIP/goip1_outgoing-00000ab4”, “__INCOMING_TENANT=6bcf72ea9694d112”) in new stack
    — Executing [s-incoming@sub-set-call-vars:5] Set(“SIP/goip1_outgoing-00000ab4”, “__CALL_SOURCE=0219—93046”) in new stack
    — Executing [s-incoming@sub-set-call-vars:6] Set(“SIP/goip1_outgoing-00000ab4”, “__CS=0219—93046”) in new stack
    — Executing [s-incoming@sub-set-call-vars:7] Set(“SIP/goip1_outgoing-00000ab4”, “__CALL_DESTINATION=0001”) in new stack
    — Executing [s-incoming@sub-set-call-vars:8] Set(“SIP/goip1_outgoing-00000ab4”, “__TENANT=6bcf72ea9694d112”) in new stack
    — Executing [s-incoming@sub-set-call-vars:9] Gosub(“SIP/goip1_outgoing-00000ab4”, “app-incoming,1”) in new stack
    — Executing [app-incoming@sub-set-call-vars:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Incoming Call App CDR”) in new stack
    — Executing [app-incoming@sub-set-call-vars:2] GotoIf(“SIP/goip1_outgoing-00000ab4”, “1?:return”) in new stack
    — Executing [app-incoming@sub-set-call-vars:3] Set(“SIP/goip1_outgoing-00000ab4”, “CDR(source)=0219—93046”) in new stack
    — Executing [app-incoming@sub-set-call-vars:4] Set(“SIP/goip1_outgoing-00000ab4”, “CDR(tenant)=vitalpbx”) in new stack
    — Executing [app-incoming@sub-set-call-vars:5] Set(“SIP/goip1_outgoing-00000ab4”, “CDR(destination)=0001”) in new stack
    — Executing [app-incoming@sub-set-call-vars:6] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s-incoming@sub-set-call-vars:10] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [0001@incoming-calls:5] Set(“SIP/goip1_outgoing-00000ab4”, “ICALL=yes”) in new stack
    — Executing [0001@incoming-calls:6] Goto(“SIP/goip1_outgoing-00000ab4”, “cos-all,300,1”) in new stack
    — Goto (cos-all,300,1)
    — Executing [300@cos-all:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “More than on digit pattern”) in new stack
    — Executing [300@cos-all:2] Gosub(“SIP/goip1_outgoing-00000ab4”, “s,1(300)”) in new stack
    — Executing [s@cos-all:1] Set(“SIP/goip1_outgoing-00000ab4”, “EXTENSION=300”) in new stack
    — Executing [s@cos-all:2] NoOp(“SIP/goip1_outgoing-00000ab4”, “Dialing 300 from 0219—93046”) in new stack
    — Executing [s@cos-all:3] Gosub(“SIP/goip1_outgoing-00000ab4”, “sub-set-global-vars,s,1(300,parking-1)”) in new stack
    — Executing [s@sub-set-global-vars:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Setting Global Vars”) in new stack
    — Executing [s@sub-set-global-vars:2] Set(“SIP/goip1_outgoing-00000ab4”, “__PICKUPMARK=300”) in new stack
    — Executing [s@sub-set-g
    lobal-vars:3] Set(“SIP/goip1_outgoing-00000ab4”, “__PARKINGLOT=parking-1”) in new stack
    — Executing [s@sub-set-global-vars:4] Set(“SIP/goip1_outgoing-00000ab4”, “__DYNAMIC_FEATURES=custom-features”) in new stack
    — Executing [s@sub-set-global-vars:5] Set(“SIP/goip1_outgoing-00000ab4”, “ICALL=no”) in new stack
    — Executing [s@sub-set-global-vars:6] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s@cos-all:4] Gosub(“SIP/goip1_outgoing-00000ab4”, “sub-set-call-vars,s,1(6bcf72ea9694d112,300,1,cos-all,ARS-all)”) in new stack
    — Executing [s@sub-set-call-vars:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Setting Call Vars”) in new stack
    — Executing [s@sub-set-call-vars:2] Set(“SIP/goip1_outgoing-00000ab4”, “_TENANT=6bcf72ea9694d112”) in new stack
    — Executing [s@sub-set-call-vars:3] Set(“SIP/goip1_outgoing-00000ab4”, “_CALL_DESTINATION=300”) in new stack
    — Executing [s@sub-set-call-vars:4] Set(“SIP/goip1_outgoing-00000ab4”, “_COS_ID=1”) in new stack
    — Executing [s@sub-set-call-vars:5] Set(“SIP/goip1_outgoing-00000ab4”, “_COS_NAME=cos-all”) in new stack
    — Executing [s@sub-set-call-vars:6] Set(“SIP/goip1_outgoing-00000ab4”, “_ARS=ARS-all”) in new stack
    — Executing [s@sub-set-call-vars:7] Set(“SIP/goip1_outgoing-00000ab4”, “CDR(tenant)=vitalpbx”) in new stack
    — Executing [s@sub-set-call-vars:8] Set(“SIP/goip1_outgoing-00000ab4”, “CDR(destination)=300”) in new stack
    — Executing [s@sub-set-call-vars:9] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s@cos-all:5] Gosub(“SIP/goip1_outgoing-00000ab4”, “sub-construct-cid,s,1”) in new stack
    — Executing [s@sub-construct-cid:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Building CID”) in new stack
    — Executing [s@sub-construct-cid:2] Set(“SIP/goip1_outgoing-00000ab4”, “_CALL_SOURCE=0219—93046”) in new stack
    — Executing [s@sub-construct-cid:3] Set(“SIP/goip1_outgoing-00000ab4”, “_CS=0219—93046”) in new stack
    — Executing [s@sub-construct-cid:4] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?return”) in new stack
    — Executing [s@sub-construct-cid:5] Gosub(“SIP/goip1_outgoing-00000ab4”, “sub-get-device-tree,s,1”) in new stack
    — Executing [s@sub-get-device-tree:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Configuring Device Tree”) in new stack
    — Executing [s@sub-get-device-tree:2] Set(“SIP/goip1_outgoing-00000ab4”, “DEV_TECHNOLOGY=SIP”) in new stack
    — Executing [s@sub-get-device-tree:3] GosubIf(“SIP/goip1_outgoing-00000ab4”, “0?s-local,1”) in new stack
    — Executing [s@sub-get-device-tree:4] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?return”) in new stack
    — Executing [s@sub-get-device-tree:5] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?pjsip”) in new stack
    — Executing [s@sub-get-device-tree:6] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?:digital”) in new stack
    — Goto (sub-get-device-tree,s,12)
    — Executing [s@sub-get-device-tree:12] Set(“SIP/goip1_outgoing-00000ab4”, “DEV_USER=goip1_outgoing”) in new stack
    — Executing [s@sub-get-device-tree:13] Set(“SIP/goip1_outgoing-00000ab4”, “INTERFACE=SIP/goip1_outgoing”) in new stack
    — Executing [s@sub-get-device-tree:14] Set(“SIP/goip1_outgoing-00000ab4”, “DEV_TREE=devices/SIP/goip1_outgoing”) in new stack
    — Executing [s@sub-get-device-tree:15] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s@sub-construct-cid:6] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?return”) in new stack
    — Executing [s@sub-construct-cid:7] Set(“SIP/goip1_outgoing-00000ab4”, “_CALL_SOURCE=0219—93046”) in new stack
    — Executing [s@sub-construct-cid:8] Set(“SIP/goip1_outgoing-00000ab4”, “_CS=0219—93046”) in new stack
    — Executing [s@sub-construct-cid:9] ExecIf(“SIP/goip1_outgoing-00000ab4”, “0?Set(CALLERID(all)=)”) in new stack
    — Executing [s@sub-construct-cid:10] Set(“SIP/goip1_outgoing-00000ab4”, “_CID_CONSTRUCTED=yes”) in new stack
    — Executing [s@sub-construct-cid:11] NoOp(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s@sub-construct-cid:12] Set(“SIP/goip1_outgoing-00000ab4”, “CDR(source)=0219—93046”) in new stack
    — Executing [s@sub-construct-cid:13] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s@cos-all:6] Gosub(“SIP/goip1_outgoing-00000ab4”, “set-global-tenant-vars,s,1”) in new stack
    — Executing [s@set-global-tenant-vars:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Setting Global Vars for vitalpbx Tenant”) in new stack
    — Executing [s@set-global-tenant-vars:2] Set(“SIP/goip1_outgoing-00000ab4”, “__TENANT_PATH=6bcf72ea9694d112”) in new stack
    — Executing [s@set-global-tenant-vars:3] Set(“SIP/goip1_outgoing-00000ab4”, “__TENANT_PREFIX=”) in new stack
    — Executing [s@set-global-tenant-vars:4] Set(“SIP/goip1_outgoing-00000ab4”, “__QUEUE_AGENTS_CONTEXT=queue-call-to-agents”) in new stack
    — Executing [s@set-global-tenant-vars:5] Set(“SIP/goip1_outgoing-00000ab4”, “__FOLLOWME_CONTEXT=ext-followme”) in new stack
    — Executing [s@set-global-tenant-vars:6] Set(“SIP/goip1_outgoing-00000ab4”, “__HINTS_CONTEXT=extension-hints”) in new stack
    — Executing [s@set-global-tenant-vars:7] Set(“SIP/goip1_outgoing-00000ab4”, “__DEFAULT_COS=cos-all”) in new stack
    — Executing [s@set-global-tenant-vars:8] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s@cos-all:7] NoOp(“SIP/goip1_outgoing-00000ab4”, “Check if is an Emergency Call”) in new stack
    — Executing [s@cos-all:8] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?emergency-calls,300,1”) in new stack
    — Executing [s@cos-all:9] Gosub(“SIP/goip1_outgoing-00000ab4”, “sub-lockphone-check,s,1”) in new stack
    — Executing [s@sub-lockphone-check:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “SUB: LOCK PHONE CHECK”) in new stack
    — Executing [s@sub-lockphone-check:2] GotoIf(“SIP/goip1_outgoing-00000ab4”, “1?unlock”) in new stack
    — Goto (sub-lockphone-check,s,12)
    — Executing [s@sub-lockphone-check:12] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s@cos-all:10] Gosub(“SIP/goip1_outgoing-00000ab4”, “sub-local-dialing,s,1”) in new stack
    — Executing [s@sub-local-dialing:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Trying to determine if is a local extension”) in new stack
    — Executing [s@sub-local-dialing:2] GotoIf(“SIP/goip1_outgoing-00000ab4”, “1?:return”) in new stack
    — Executing [s@sub-local-dialing:3] Goto(“SIP/goip1_outgoing-00000ab4”, “300,1”) in new stack
    — Goto (sub-local-dialing,300,1)
    — Executing [300@sub-local-dialing:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Dialing Local Extension”) in new stack
    — Executing [300@sub-local-dialing:2] Gosub(“SIP/goip1_outgoing-00000ab4”, “sub-setup-call-type,s,1(internal)”) in new stack
    — Executing [s@sub-setup-call-type:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Determinating Call Type”) in new stack
    — Executing [s@sub-setup-call-type:2] GotoIf(“SIP/goip1_outgoing-00000ab4”, “1?return”) in new stack
    — Goto (sub-setup-call-type,s,5)
    — Executing [s@sub-setup-call-type:5] Set(“SIP/goip1_outgoing-00000ab4”, “CDR(calltype)=2”) in new stack
    — Executing [s@sub-setup-call-type:6] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [300@sub-local-dialing:3] Set(“SIP/goip1_outgoing-00000ab4”, “_DESTINATION_STATE=NOT_INUSE”) in new stack
    — Executing [300@sub-local-dialing:4] Set(“SIP/goip1_outgoing-00000ab4”, “_DESTINATION_NUMBER=300”) in new stack
    — Executing [300@sub-local-dialing:5] Set(“SIP/goip1_outgoing-00000ab4”, “_DESTINATION_COS_NAME=cos-all”) in new stack
    — Executing [300@sub-local-dialing:6] Gosub(“SIP/goip1_outgoing-00000ab4”, “sub-check-cos-privacy,s,1(cos-all,1,cos-all)”) in new stack
    — Executing [s@sub-check-cos-privacy:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Checking Privacy of CoS: cos-all”) in new stack
    — Executing [s@sub-check-cos-privacy:2] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?:no_local”) in new stack
    — Goto (sub-check-cos-privacy,s,15)
    — Executing [s@sub-check-cos-privacy:15] NoOp(“SIP/goip1_outgoing-
    00000ab4”, “No Local Call, Allow any CoS”) in new stack
    — Executing [s@sub-check-cos-privacy:16] Goto(“SIP/goip1_outgoing-00000ab4”, “return”) in new stack
    — Goto (sub-check-cos-privacy,s,22)
    — Executing [s@sub-check-cos-privacy:22] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [300@sub-local-dialing:7] Set(“SIP/goip1_outgoing-00000ab4”, “DIAL_STRING=SIP/300”) in new stack
    — Executing [300@sub-local-dialing:8] Set(“SIP/goip1_outgoing-00000ab4”, “DB(6bcf72ea9694d112/LASTCALLER/300)=0219—93046”) in new stack
    — Executing [300@sub-local-dialing:9] Set(“SIP/goip1_outgoing-00000ab4”, “IGNORE_DIVERSIONS=”) in new stack
    — Executing [300@sub-local-dialing:10] Set(“SIP/goip1_outgoing-00000ab4”, “QUEUE_CALL=”) in new stack
    — Executing [300@sub-local-dialing:11] GosubIf(“SIP/goip1_outgoing-00000ab4”, “0?sub-queue-members,s,1”) in new stack
    — Executing [300@sub-local-dialing:12] GosubIf(“SIP/goip1_outgoing-00000ab4”, “0?:sub-check-diversions,s,1(predialing)”) in new stack
    — Executing [s@sub-check-diversions:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Checking diversions for extension 300”) in new stack
    — Executing [s@sub-check-diversions:2] GosubIf(“SIP/goip1_outgoing-00000ab4”, “0?:return”) in new stack
    — Executing [s@sub-check-diversions:6] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s@sub-check-diversions:3] Set(“SIP/goip1_outgoing-00000ab4”, “__CALL_ORIGIN=diversions”) in new stack
    — Executing [s@sub-check-diversions:4] Set(“SIP/goip1_outgoing-00000ab4”, “__DIVERSION_ORIGIN=300”) in new stack
    — Executing [s@sub-check-diversions:5] Gosub(“SIP/goip1_outgoing-00000ab4”, “s-predialing,1”) in new stack
    — Executing [s-predialing@sub-check-diversions:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Diversions on pre-dialing”) in new stack
    — Executing [s-predialing@sub-check-diversions:2] GosubIf(“SIP/goip1_outgoing-00000ab4”, “0?:diversion-testing,1(Do not Disturb,DND,,,dnd)”) in new stack
    — Executing [diversion-testing@sub-check-diversions:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [diversion-testing@sub-check-diversions:2] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?:next-diversion”) in new stack
    — Goto (sub-check-diversions,diversion-testing,26)
    — Executing [diversion-testing@sub-check-diversions:26] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s-predialing@sub-check-diversions:3] Gosub(“SIP/goip1_outgoing-00000ab4”, “diversion-testing,1(Call Forward Immeditely,CFI,,,toggle_cfi)”) in new stack
    — Executing [diversion-testing@sub-check-diversions:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [diversion-testing@sub-check-diversions:2] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?:next-diversion”) in new stack
    — Goto (sub-check-diversions,diversion-testing,26)
    — Executing [diversion-testing@sub-check-diversions:26] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s-predialing@sub-check-diversions:4] GosubIf(“SIP/goip1_outgoing-00000ab4”, “0?:diversion-testing,1(Boss Secretray,BOSS,,,boss_secretary)”) in new stack
    — Executing [diversion-testing@sub-check-diversions:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [diversion-testing@sub-check-diversions:2] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?:next-diversion”) in new stack
    — Goto (sub-check-diversions,diversion-testing,26)
    — Executing [diversion-testing@sub-check-diversions:26] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s-predialing@sub-check-diversions:5] GosubIf(“SIP/goip1_outgoing-00000ab4”, “0?:diversion-testing,1(Personal Assistant,PEA,sub-personal-assistant,s,1)”) in new stack
    — Executing [diversion-testing@sub-check-diversions:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [diversion-testing@sub-check-diversions:2] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?:next-diversion”) in new stack
    — Goto (sub-check-diversions,diversion-testing,26)
    — Executing [diversion-testing@sub-check-diversions:26] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s-predialing@sub-check-diversions:6] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s@sub-check-diversions:6] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [300@sub-local-dialing:13] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?post-dial”) in new stack
    — Executing [300@sub-local-dialing:14] Gosub(“SIP/goip1_outgoing-00000ab4”, “parse-dial-string,s,1”) in new stack
    — Executing [s@parse-dial-string:1] NoOp(“SIP/goip1_outgoing-00000ab4”, “Parsing dial string: SIP/300”) in new stack
    — Executing [s@parse-dial-string:2] Set(“SIP/goip1_outgoing-00000ab4”, “NEW_DIAL_STRING=”) in new stack
    — Executing [s@parse-dial-string:3] Set(“SIP/goip1_outgoing-00000ab4”, “COUNTER=1”) in new stack
    — Executing [s@parse-dial-string:4] Set(“SIP/goip1_outgoing-00000ab4”, “CURRENT_DEVICE=SIP/300”) in new stack
    — Executing [s@parse-dial-string:5] While(“SIP/goip1_outgoing-00000ab4”, “1”) in new stack
    — Executing [s@parse-dial-string:6] Set(“SIP/goip1_outgoing-00000ab4”, “TECHNOLOGY=SIP”) in new stack
    — Executing [s@parse-dial-string:7] Set(“SIP/goip1_outgoing-00000ab4”, “USER=300”) in new stack
    — Executing [s@parse-dial-string:8] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?:regular”) in new stack
    — Goto (parse-dial-string,s,12)
    — Executing [s@parse-dial-string:12] Set(“SIP/goip1_outgoing-00000ab4”, “PARSED_DEV=SIP/300”) in new stack
    — Executing [s@parse-dial-string:13] GotoIf(“SIP/goip1_outgoing-00000ab4”, “1?:concatenate”) in new stack
    — Executing [s@parse-dial-string:14] Set(“SIP/goip1_outgoing-00000ab4”, “NEW_DIAL_STRING=SIP/300”) in new stack
    — Executing [s@parse-dial-string:15] Goto(“SIP/goip1_outgoing-00000ab4”, “next”) in new stack
    — Goto (parse-dial-string,s,18)
    — Executing [s@parse-dial-string:18] Set(“SIP/goip1_outgoing-00000ab4”, “COUNTER=2”) in new stack
    — Executing [s@parse-dial-string:19] Set(“SIP/goip1_outgoing-00000ab4”, “CURRENT_DEVICE=”) in new stack
    — Executing [s@parse-dial-string:20] EndWhile(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [s@parse-dial-string:5] While(“SIP/goip1_outgoing-00000ab4”, “0”) in new stack
    — Executing [s@parse-dial-string:21] NoOp(“SIP/goip1_outgoing-00000ab4”, “New dialstring: SIP/300”) in new stack
    — Executing [s@parse-dial-string:22] Set(“SIP/goip1_outgoing-00000ab4”, “DIAL_STRING=SIP/300”) in new stack
    — Executing [s@parse-dial-string:23] Return(“SIP/goip1_outgoing-00000ab4”, “”) in new stack
    — Executing [300@sub-local-dialing:15] NoOp(“SIP/goip1_outgoing-00000ab4”, “Configuring Dial Settings”) in new stack
    — Executing [300@sub-local-dialing:16] Set(“SIP/goip1_outgoing-00000ab4”, “RING_TIME=30”) in new stack
    — Executing [300@sub-local-dialing:17] Set(“SIP/goip1_outgoing-00000ab4”, “RING_TIME=30”) in new stack
    — Executing [300@sub-local-dialing:18] Set(“SIP/goip1_outgoing-00000ab4”, “RING_TIME=30”) in new stack
    — Executing [300@sub-local-dialing:19] Set(“SIP/goip1_outgoing-00000ab4”, “DIAL_OPTIONS=r”) in new stack
    — Executing [300@sub-local-dialing:20] Set(“SIP/goip1_outgoing-00000ab4”, “DIAL_OPTIONS=r”) in new stack
    — Executing [300@sub-local-dialing:21] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?:answermode”) in new stack
    — Goto (sub-local-dialing,300,25)
    — Executing [300@sub-local-dialing:25] Set(“SIP/goip1_outgoing-00000ab4”, “ANSWER_MODE=disable”) in new stack
    — Executing [300@sub-local-dialing:26] Set(“SIP/goip1_outgoing-00000ab4”, “ANSWER_MODE=disable”) in new stack
    — Executing [300@sub-local-dialing:27] ExecIf(“SIP/goip1_outgoing-00000ab4”, “0?Macro(intercom)”) in new stack
    — Executing [300@sub-local-dialing:28] Set(“SIP/goip1_outgoing-00000ab4”, “IS_HOT_DESK=no”) in new stack
    — Executing [300@sub-local-dialing:29] Set(“SIP/goip1_outgoing-00000ab4”, “M
    OH_CLASS=default”) in new stack
    — Executing [300@sub-local-dialing:30] GosubIf(“SIP/goip1_outgoing-00000ab4”, “0?sub-set-moh,s,1(default)”) in new stack
    — Executing [300@sub-local-dialing:31] GotoIf(“SIP/goip1_outgoing-00000ab4”, “0?busy-here”) in new stack
    — Executing [300@sub-local-dialing:32] Set(“SIP/goip1_outgoing-00000ab4”, “FORCE_RECORDING=no”) in new stack
    — Executing [300@sub-local-dialing:33] Set(“SIP/goip1_outgoing-00000ab4”, “DIAL_OPTIONS=rU(sub-call-recording^6bcf72ea9694d112^0219—93046^300^no)”) in new stack
    — Executing [300@sub-local-dialing:34] Set(“SIP/goip1_outgoing-00000ab4”, “__TRANSFERED_CALL=TRUE”) in new stack
    — Executing [300@sub-local-dialing:35] Dial(“SIP/goip1_outgoing-00000ab4”, “SIP/300,30,rU(sub-call-recording^6bcf72ea9694d112^0219—93046^300^no)”) in new stack

    0
Viewing 3 replies - 1 through 3 (of 3 total)
  • Replies
    Up
    0
    Down

    This feature only works if the call returns not answered or busy

    0
    jduraes
    Participant
    Up
    0
    Down

    @ing-joserivera26

    Hi Jose,

    that’s the case, call was not answered and I can see it on dynamic route list on web.

     

    0
    Up
    0
    Down

    Remember the caller ID (on an incoming call) must match with the dialed DID (used on the outgoing call) for matching with the dynamic routes list.

    0
Viewing 3 replies - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.