Google Assistan not working it gives busy tone

VitalPBX Community Support General Discussion Google Assistan not working it gives busy tone

  • Post
    voiprehberi
    Participant

    Hi there, i installed google assistant to my vitalpbx and when i dial to *789 it give busy tone.

    dialplan show cos-hepsi-custom command log

     

    [ Context ‘cos-hepsi-custom’ created by ‘pbx_config’ ]
    ‘fake-ext’ => 1. NoOp(Fake extension for generate this context from VitalPBX) [extensions__50-1-dialplan.conf:2977]

    -= 1 extension (1 priority) in 1 context. =-

    Asterisk -rvvvvv log

     

    — Started music on hold, class ‘moh2’, on channel ‘SIP/4000-0000008a’
    [2020-04-10 04:59:59] WARNING[2117][C-00000074]: chan_sip.c:24305 handle_response_invite: Received response: “Forbidden” from ‘”did” <sip:did@ip>;tag=as6d8d5be9’
    == Everyone is busy/congested at this time (1:0/0/1)
    — Stopped music on hold on SIP/4000-0000008a
    — Executing [*789@trk-2-dial:19] NoOp(“SIP/4000-0000008a”, “After Dial”) in new stack
    — Executing [*789@trk-2-dial:20] GotoIf(“SIP/4000-0000008a”, “1?come-back”) in new stack
    — Goto (trk-2-dial,*789,22)
    — Executing [*789@trk-2-dial:22] Return(“SIP/4000-0000008a”, “”) in new stack
    — Executing [*789@trk-2:3] GotoIf(“SIP/4000-0000008a”, “1?come-back”) in new stack
    — Goto (trk-2,*789,5)
    — Executing [*789@trk-2:5] Return(“SIP/4000-0000008a”, “”) in new stack
    — Executing [s-4@cos-hepsi-post:4] NoOp(“SIP/4000-0000008a”, “Hangup Cause: 21, Dial Status: CHANUNAVAIL”) in new stack
    — Executing [s-4@cos-hepsi-post:5] NoCDR(“SIP/4000-0000008a”, “”) in new stack
    — Executing [s-4@cos-hepsi-post:6] GotoIf(“SIP/4000-0000008a”, “0?end_call”) in new stack
    — Executing [s-4@cos-hepsi-post:7] Gosub(“SIP/4000-0000008a”, “sub-hangup-cause,s,1(21)”) in new stack
    — Executing [s@sub-hangup-cause:1] NoOp(“SIP/4000-0000008a”, “Executing Hangup Cause 21”) in new stack
    — Executing [s@sub-hangup-cause:2] GotoIf(“SIP/4000-0000008a”, “0?hangup”) in new stack
    — Executing [s@sub-hangup-cause:3] NoCDR(“SIP/4000-0000008a”, “”) in new stack
    — Executing [s@sub-hangup-cause:4] Answer(“SIP/4000-0000008a”, “”) in new stack
    — Executing [s@sub-hangup-cause:5] GotoIf(“SIP/4000-0000008a”, “0?invalid_route,1”) in new stack
    — Executing [s@sub-hangup-cause:6] GotoIf(“SIP/4000-0000008a”, “1?busy,1”) in new stack
    — Goto (sub-hangup-cause,busy,1)
    — Executing [busy@sub-hangup-cause:1] NoOp(“SIP/4000-0000008a”, “Busy”) in new stack
    — Executing [busy@sub-hangup-cause:2] Busy(“SIP/4000-0000008a”, “5”) in new stack
    == Spawn extension (sub-hangup-cause, busy, 2) exited non-zero on ‘SIP/4000-0000008a’

    Where am i wrong ?

    0
Viewing 3 replies - 1 through 3 (of 3 total)
  • Replies
    PitzKey
    Participant
    US
    Up
    0
    Down

    How did you install it?

    Also, seems like you created context in extensions__50-1-dialplan.conf. Don’t do that, it will get overwritten next time you update your PBX.

    0
    Up
    0
    Down

    Looks like you have some issues with the permissions. Are you calling locally or externally?

    This line draw my attention:

    chan_sip.c:24305 handle_response_invite: Received response: "Forbidden" from '"did" 
    0
    voiprehberi
    Participant
    Up
    0
    Down

    I am calling Locally.

    0
Viewing 3 replies - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.