How do I configure my TDM410P card for Australia?

VitalPBX Community Support General Discussion How do I configure my TDM410P card for Australia?

Up
0
Down
  • Post
    michal
    Participant

    The way I was able to get it to work correctly was as follows:

    systemctl stop asterisk.service

    rmmod wctdm24xxp

    insmod /usr/lib/modules/3.10.0-862.el7.x86_64/extra/dahdi/wctdm24xxp/wctdm24xxp.ko opermode=AUSTRALIA

    systemctl start asterisk.service

    But I suspect there must be an easier way? One that survives a reboot.

    Thanks in advance.

     

    0
Viewing 3 replies - 1 through 3 (of 3 total)
  • Replies

    No, by now there is no way to configure the opermode from the GUI. However, we will try to build a module to configure this kind of settings ASAP.

    0
    michal
    Participant

    Great to hear you’ll be working on it.

    I’ve discovered that for optimum performance I need the following:

    insmod /usr/lib/modules/3.10.0-862.el7.x86_64/extra/dahdi/wctdm24xxp/wctdm24xxp.ko opermode=AUSTRALIA latency=6 companding=alaw

    Folowed by:

    fxotune -s

    Is there any way of making this automatic using the files in /etc/modprobe.d?

    0

    You can write those  settings on /etc/modprobe.d/dahdi.conf in the following format:

    options wctdm24xxp opermode=AUSTRALIA latency=6 companding=alaw


    0
Viewing 3 replies - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.