Inbound routing error

VitalPBX Community Support General Discussion Inbound routing error

  • Post
    mngnskh
    Participant
    I have many tenants and those tenants have 2 or more DIDs. If one DID is called, inbound routing does not work. Each DID have own inbound routing config. This config does not work.

    Case:

    The DID 1919 in tenant T1 is called. Then T2_2020 answers and says no route to the destination.

    Please help

    Executing [1919@default-trunk:1] Gosub(“SIP/T2_2020-00000038”, “set-global-tenant-vars,s,1”) in new stack
    — Executing [s@set-global-tenant-vars:1] NoOp(“SIP/T2_2020-00000038”, “Setting Global Vars for vitalpbx Tenant”) in new stack
    — Executing [s@set-global-tenant-vars:2] Set(“SIP/T2_2020-00000038”, “__TENANT_PATH=f443e1938ba73851”) in new stack
    — Executing [s@set-global-tenant-vars:3] Set(“SIP/T2_2020-00000038”, “__TENANT_PREFIX=”) in new stack
    — Executing [s@set-global-tenant-vars:4] Set(“SIP/T2_2020-00000038”, “__QUEUE_AGENTS_CONTEXT=queue-call-to-agents”) in new stack
    — Executing [s@set-global-tenant-vars:5] Set(“SIP/T2_2020-00000038”, “__FOLLOWME_CONTEXT=ext-followme”) in new stack
    — Executing [s@set-global-tenant-vars:6] Set(“SIP/T2_2020-00000038”, “__HINTS_CONTEXT=extension-hints”) in new stack
    — Executing [s@set-global-tenant-vars:7] Set(“SIP/T2_2020-00000038”, “__DEFAULT_COS=cos-all”) in new stack
    — Executing [s@set-global-tenant-vars:8] Return(“SIP/T2_2020-00000038”, “”) in new stack
    — Executing [1919@default-trunk:2] Gosub(“SIP/T2_2020-00000038”, “sub-check-blacklist,s,1(f443e1938ba73851,1920)”) in new stack
    — Executing [s@sub-check-blacklist:1] NoOp(“SIP/T2_2020-00000038”, “Testing if 1920 is in Black List”) in new stack
    — Executing [s@sub-check-blacklist:2] GotoIf(“SIP/T2_2020-00000038”, “0?banned”) in new stack
    — Executing [s@sub-check-blacklist:3] Return(“SIP/T2_2020-00000038”, “”) in new stack
    — Executing [1919@default-trunk:3] Gosub(“SIP/T2_2020-00000038”, “sub-setup-call-type,s,1(incoming)”) in new stack
    — Executing [s@sub-setup-call-type:1] NoOp(“SIP/T2_2020-00000038”, “Determinating Call Type”) in new stack
    — Executing [s@sub-setup-call-type:2] GotoIf(“SIP/T2_2020-00000038”, “0?return”) in new stack
    — Executing [s@sub-setup-call-type:3] Gosub(“SIP/T2_2020-00000038”, “s-incoming,1()”) in new stack
    — Executing [s-incoming@sub-setup-call-type:1] NoOp(“SIP/T2_2020-00000038”, “Incoming Call”) in new stack
    — Executing [s-incoming@sub-setup-call-type:2] Set(“SIP/T2_2020-00000038”, “__CALL_TYPE=2”) in new stack
    — Executing [s-incoming@sub-setup-call-type:3] Set(“SIP/T2_2020-00000038”, “__CALL_TYPE_LABEL=IN”) in new stack
    — Executing [s-incoming@sub-setup-call-type:4] Return(“SIP/T2_2020-00000038”, “”) in new stack
    — Executing [s@sub-setup-call-type:4] Set(“SIP/T2_2020-00000038”, “__CALL_TYPE_CONFIGURED=yes”) in new stack
    — Executing [s@sub-setup-call-type:5] Set(“SIP/T2_2020-00000038”, “CDR(calltype)=2”) in new stack
    — Executing [s@sub-setup-call-type:6] Return(“SIP/T2_2020-00000038”, “”) in new stack
    — Executing [1919@default-trunk:4] Gosub(“SIP/T2_2020-00000038”, “dynamic-routing-in,s,1(1920)”) in new stack
    — Executing [s@dynamic-routing-in:1] NoOp(“SIP/T2_2020-00000038”, “Test if must to apply dynamic routing”) in new stack
    — Executing [s@dynamic-routing-in:2] Set(“SIP/T2_2020-00000038”, “EXTERNAL_CALLER=1920”) in new stack
    — Executing [s@dynamic-routing-in:3] Set(“SIP/T2_2020-00000038”, “DYNROUTING_DM=0”) in new stack
    — Executing [s@dynamic-routing-in:4] GotoIf(“SIP/T2_2020-00000038”, “1?gd”) in new stack
    — Goto (dynamic-routing-in,s,6)
    — Executing [s@dynamic-routing-in:6] GotoIf(“SIP/T2_2020-00000038”, “0?:rb”) in new stack
    — Goto (dynamic-routing-in,s,11)
    — Executing [s@dynamic-routing-in:11] Return(“SIP/T2_2020-00000038”, “”) in new stack
    — Executing [1919@default-trunk:5] Goto(“SIP/T2_2020-00000038”, “incoming-calls,1919,1”) in new stack
    — Goto (incoming-calls,1919,1)
    — Channel ‘SIP/T2_2020-00000038’ sent to invalid extension: context,exten,priority=incoming-calls,1919,1
    — Executing [i@incoming-calls:1] NoCDR(“SIP/T2_2020-00000038”, “”) in new stack
    — Executing [i@incoming-calls:2] Goto(“SIP/T2_2020-00000038”, “invalid-dest,s,1”) in new stack
    — Goto (invalid-dest,s,1)
    — Executing [s@invalid-dest:1] NoOp(“SIP/T2_2020-00000038”, “Invalid Route to Dial”) in new stack
    — Executing [s@invalid-dest:2] GotoIf(“SIP/T2_2020-00000038”, “0?end”) in new stack
    — Executing [s@invalid-dest:3] Playback(“SIP/T2_2020-00000038”, “im-sorry&no-route-exists-to-dest&vm-goodbye”) in new stack
    > 0x7f342026c080 — Strict RTP switching to RTP target address 10.0.0.12:15452 as source
    — <SIP/T2_2020-00000038> Playing ‘im-sorry.ulaw’ (language ‘en’)
    — <SIP/T2_2020-00000038> Playing ‘no-route-exists-to-dest.ulaw’ (language ‘en’)
    — <SIP/T2_2020-00000038> Playing ‘vm-goodbye.ulaw’ (language ‘en’)

    0
Viewing 1 replies (of 1 total)
  • Replies
    TheG-Man
    Participant
    Up
    1
    Down
    Got the same issue after upgrading from 3.0.2-2 to whatever the latest version available through yum update.
    0
Viewing 1 replies (of 1 total)
  • You must be logged in to reply to this topic.