Physical machine install

Try with the Etcher: https://etcher.io/

Posted by: Rhoadesy

Thanks will give it a go.  

Is there any particular NUC/Aplliance/Mini PC that is prefered/works with VitalPBX (without using a VirtualBox) or any that doesnt work with it?

We’re using a VirtualPBX image on one of these:
https://www.ebuyer.com/791864-asus-vivomini-un65u-intel-i5-7200u-barebone-un65u-bm106m?mkwid=sWA3N2WiH_dc&pcrid=51630194939&pkw=&pmt=&gclid=CjwKCAjwr-PYBRB8EiwALtjbzw-OWFvGBp3-2FgubQOGGWfMYSEpt-TN2AcEenW5Sccdfh1L88naFRoClTQQAvD_BwE

It’s been working flawlessly since install with a single 8Gb DDR Ram module and 240GB SSD… It’s handling about 10 simultaneous calls atm, whilst recording them and never going above 10% CPU and Ram utilization. We are using it SIP only  though with no FXO or gateways.

Nope. It’s a direct install from the vitalpbx iso.. I used a usb DVD drive to do the install, but have done it successfully from usb stick before. Can’t remember which utility I used to create the usb tho!