Provisioning Grandstream GXP2170

VitalPBX Community Support General Discussion Provisioning Grandstream GXP2170

Up
0
Down
  • Post
    levon
    Participant

    I have used the endpoint manager to create config files for the phone, but it appears that BLFs (that is all I tested so far) are not created properly for buttons higher than the standard 12.

    Buttons 1-12 create something like this…

    <P1475>page 1 1001</P1475>
    	<P1476>1001</P1476>

    buttons 13-and higher create

    <P23830>page 2 1001</P23830>
    	<P23831>1001</P23831>
    	<P23832>11</P23832>
    	<P23833>0</P23833>

    These BLFs on the second page (position 13 or higher) show as LDAP lookup on the phone display.

    attached is the config as generated by VitalPBX and from the phone after downloading the config

    0
Viewing 2 replies - 1 through 2 (of 2 total)
  • Replies
    levon
    Participant

    After reading through the configuration templates from grandstream.

    It looks like the problem is when transisitioning from “Fixed” to “Dynamic” VPKs

    On FIxed Keys, Keymode 11 = BLF

    On Dynamic Keys Keymode 11 = LDAP search…

    <Below is from Grandstream Templates>

     
    	######################################################################################
    # VPK 6 -- fixed VPK
    ######################################################################################
    # Key Mode for line VPK. Default is 0.
    # Number: -1, 0, 1, 10 -- 36
    # -1 - None, 0 - Default, 1 - shared line, 10 - Speed Dial, 11 - BLF, 12 - Presence Watcher
    # 13 - Eventlist BLF, 14 - Speed Dial via active account, 15 - DialDTMF
    # 16 - Voicemail, 17 - Call Return, 18 - Transfer, 19 - CallPark, 20 - Intercom
    # 21 - LDAP Search, 22 - Conference, 23 - Multicast Paging, 24 - Record, 25 - Call Log
    # 26 - Monitored Call Park, 27 - Menu 28-XML Application,29-Information, 30-Message
    # 31 - Forward, 32 - DND, 33 - Redial, 34 - Instant Messages, 35 - Multicast Listen Address, 36 - Keypad Lock
    # Mandatory
    # P1373 = 0

    # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4,4 - Account 5, 5 - Account 6
    # Number: 0, 1, 2, 3, 4, 5. Default is 5.
    # Mandatory
    # P1374 = 5

    # Description. Max length allowed is 32 characters.
    # String
    # P1475 =

    # Value. Max length allowed is 64 characters.
    # String
    # P1476 =

    # Locked: 0 - uncheck, 1 - check. Default is 0
    # Mandatory
    # Number: 0, 1
    # P23973 = 0

    ######################################################################################
    # VPK 14--Dynamic VPK
    ######################################################################################
    # Key Mode for Dynamic VPK.
    # Number: -1 -- 26
    # -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher
    # 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF
    # 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom
    # 11 - LDAP Search, 12 - Conference, 13 - Multicast Paging, 14 - Record, 15 - Call Log
    # 16 - Monitored Call Park, 17 - Menu 18- XML Application,19 - Information, 20 - Message
    # 21 - Forward, 22 - DND, 23 - Redial, 24 - Instant Messages, 25 - Multicast Listen Address, 26 - Keypad Lock
    # Mandatory
    # P23828 = -1

    # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
    # Number: 0, 1, 2, 3.
    # Mandatory
    # P23829 = 0

    # Description.
    # String.
    # P23830 =

    # Value.
    # String.
    # P23831 =
    0
    levon
    Participant

    I was able to further test this by setting the “broken” blf keys in the endpoint manager to

    shared line
    which has a value of 1 in the endpoint manager, this equates to BLF on Dynamic VPKs, and Shared Line on Fixed VPKs

    and they did indeed show up as BLF on the phone config.

    0
Viewing 2 replies - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.