Queues will show missed call everytime

VitalPBX Community Support Wish List Queues will show missed call everytime

  • Post
    mo10
    Moderator
    none

    VitalPBX 2.3.3-1
    Queues will have a missed call after “Member Timeout” even the caller did not really hang up.
    So when Setting the “Member Timeout” to 10 and the call is in queue for 60 seconds you will see 10 missed calls on the phone.

    This happens to Yealink T46s and Softphone BRIA as well. More phones to come.

    How to change that or only have this on a really missed call?

    Thank you!

    0
Viewing 15 replies - 1 through 15 (of 17 total)
  • Replies
    Up
    0
    Down

    It logs as a missed call because the agent didn’t answer, so, is a missed call

    0
    mo10
    Moderator
    none
    Up
    0
    Down

    This is not okay. Imagine someone waiting in Queue for 2 minutes. There will be 
     20 missed calls and everybody would try to call back. There should be a button to deactivate missed calls in a Queue or BETTER: only a missed call if the call really did not get answered by any agent.
    Could you please do this?

    Thanks!

    0
    Up
    0
    Down

    This is why you must define a SLA target, for example 20 seconds, that means that any call must be answer in less than 20 seconds. If your customers wait 2 minutes that means you don’t have enough agents.

    0
    mo10
    Moderator
    none
    Up
    0
    Down

    This can not be the solution. There are many companies where agents are sick and the caller has to wait a little longer. You can’t say: employ more agents because VitalPBX is showing missed calls.
    Please help. Other solutions don’t have a missed call on every Member Timeout or let it enable or disable.

    0
    Up
    0
    Down

    This how Asterisk works. The queues config file doesn’t have any parameter to say if will log or not missed calls by agents. 

    However, I will send this to development department to see is they can do something about it.

    0
    mo10
    Moderator
    none
    Up
    0
    Down

    This is not true. Yeastar even disabled the missed call in Queues.
    Better solution would be to be able to choose.
    Askozia can do that and it is 100% Asterisk.
    See screenshot attached.
    Please help.

    Thanks!

    0
    mo10
    Moderator
    none
    Up
    0
    Down

    But you are right this is NOT done in the Queues.conf. Must be somewhere else.
    Thanks

    0
    mo10
    Moderator
    none
    Up
    0
    Down

    Small hint: option -c on the call command. Does this help?
    https://www.voip-info.org/asterisk-cmd-dial/#Options

    • c: Sets the channel driver flag that the “call is answered elsewhere” if Dial() cancels the call
    0
    mo10
    Moderator
    none
    Up
    0
    Down
     
    Okay so this would be the solution for Ring-Groups:
     
    Posted by: mo10

    Small hint: option -c on the call command. Does this help?
    https://www.voip-info.org/asterisk-cmd-dial/#Options

    • c: Sets the channel driver flag that the “call is answered elsewhere” if Dial() cancels the call

    This is the solution for Queues:
    same => n,Queue(Q4321,C,,,30)
    “C” = call is answered elsewhere = no missed call on timeout.

    Both could be easily implemented with a radio-button inside VitalPBX.
    THANKS!

    0
    Up
    0
    Down
    Posted by: mo10

    Small hint: option -c on the call command. Does this help?
    https://www.voip-info.org/asterisk-cmd-dial/#Options

    • c: Sets the channel driver flag that the “call is answered elsewhere” if Dial() cancels the call

    You may add the “c” option on dial profiles (Settings >> Technology Settings >> Dial Profiles). Check the picture attached.

    For queues, we may add this option for the next version.

     

    0
    mo10
    Moderator
    none
    Up
    0
    Down
    Posted by: mrivera

    You may add the “c” option on dial profiles (Settings >> Technology Settings >> Dial Profiles). Check the picture attached.

    For queues, we may add this option for the next version.

     

    Where to choose the dial-profile for the ring-group?

    Please add radio-button for ring-group as well. Would be awesome.
    Radiobutton for Ringgroup and Queue.

    THANKS!

    0
    Up
    0
    Down

    What I recommend you, add the “c” option directly to the extension.

    About what are you requesting, we will add it for the next version of VitalPBX.

    0
    mo10
    Moderator
    none
    Up
    0
    Down
    Posted by: mrivera

    About what are you requesting, we will add it for the next version of VitalPBX.

    Awesome thank you.
    Since changing the Dial Profile in the extension will cause a other problem:
    I want missed calls for internal call. But with setting the “c” option this won’t work anymore.

    Thanks for adding the solution to Ring-Groups and Queues the next Version of VitalPBX.

    0
    Up
    0
    Down

    You’re Welcome!!

    0
    BigBommel
    Participant
    Up
    0
    Down

    Hello,
    many thanks. With version 2.3.4 it works great In the queue, is it possible to do this for the Ring Group?

    0
Viewing 15 replies - 1 through 15 (of 17 total)
  • You must be logged in to reply to this topic.