Sip port for external Wan connections

VitalPBX Community Support General Discussion Sip port for external Wan connections

Up
0
Down
  • Post
    palacecomputers
    Participant

    I would like to have internal devices use port 5060 settings just as Vitalpbx ships.   But can i some how have it also use another port lets say 8060 for external wan users.  That way bots thats search for port 5060 will not find my PBX.  But all internal phones will not need to be messed with.

    Is there a way to have vitalpbx monitor to port numbers for Sip connections.  

    I have tried using firewall portward and redirect example inbound to firewall ip 8060 is redirected to 5060.  calls connect but caller has no audio.

    as soon as i set portfoward in hardware firewall back to 5060 all works fine.

     

    Greg

    0
Viewing 2 replies - 1 through 2 (of 2 total)
  • Replies

    You may do the port forwarding through the Router

    0
    palacecomputers
    Participant

    I figured it out   under vitalpbx where it ask for external ip i added the :5070 for example which allows me to make it work.  I was doing the port forward but vitalpbx needed the port.  thanks for the help.  Keep up the good work with the excellent PBX front end.

     

    Greg

    0
Viewing 2 replies - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.