Two PBX connected by IAX, incoming calls from remote go to Inbound route catch all instead to call extension

VitalPBX Community Support General Discussion Two PBX connected by IAX, incoming calls from remote go to Inbound route catch all instead to call extension

  • Post
    pdifeo
    Participant

    Hi,

    I have two PBX connected via IAX2. The first PBX (VitalPBX 2.3.1-3) with extensions number 1xx and 4xx and the second PBX (Elastix 2.3) with extensions numbers 5XX. 

    When a call start from 5XX to 1xx, the call is catched by Inbound route instead to call the extension called. Why ?

    Below the trace. Thanks in advance for the help

    [2019-07-08 17:26:25] VERBOSE[20892] chan_iax2.c: Accepting AUTHENTICATED call from 192.168.1.251:4569:
    > requested format = alaw,
    > requested prefs = (alaw),
    > actual format = alaw,
    > host prefs = (ulaw|alaw|g729),
    > priority = caller
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@trk-6-in:1] NoOp(“IAX2/out_italy-13703”, “Incoming call through: IAX_SPAIN”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@trk-6-in:2] Set(“IAX2/out_italy-13703”, “DID=445”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@trk-6-in:3] Goto(“IAX2/out_italy-13703”, “default-trunk,445,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (default-trunk,445,1)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@default-trunk:1] Gosub(“IAX2/out_italy-13703”, “set-global-tenant-vars,s,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:1] NoOp(“IAX2/out_italy-13703”, “Setting Global Vars for vitalpbx Tenant”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:2] Set(“IAX2/out_italy-13703”, “__TENANT_PATH=c38e1aa7f37853e4”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:3] Set(“IAX2/out_italy-13703”, “__TENANT_PREFIX=”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:4] Set(“IAX2/out_italy-13703”, “__QUEUE_AGENTS_CONTEXT=queue-call-to-agents”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:5] Set(“IAX2/out_italy-13703”, “__FOLLOWME_CONTEXT=ext-followme”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:6] Set(“IAX2/out_italy-13703”, “__HINTS_CONTEXT=extension-hints”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:7] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@default-trunk:2] Gosub(“IAX2/out_italy-13703”, “sub-check-blacklist,s,1(c38e1aa7f37853e4,520)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-blacklist:1] NoOp(“IAX2/out_italy-13703”, “Testing if 520 is in Black List”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-blacklist:2] GotoIf(“IAX2/out_italy-13703”, “0?banned”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-blacklist:3] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@default-trunk:3] Gosub(“IAX2/out_italy-13703”, “sub-setup-call-type,s,1(incoming)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-setup-call-type:1] NoOp(“IAX2/out_italy-13703”, “Determinating Call Type”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-setup-call-type:2] GotoIf(“IAX2/out_italy-13703”, “0?return”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-setup-call-type:3] Gosub(“IAX2/out_italy-13703”, “s-incoming,1()”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-incoming@sub-setup-call-type:1] NoOp(“IAX2/out_italy-13703”, “Incoming Call”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-incoming@sub-setup-call-type:2] Set(“IAX2/out_italy-13703”, “__CALL_TYPE=2”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-incoming@sub-setup-call-type:3] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-setup-call-type:4] Set(“IAX2/out_italy-13703”, “__CALL_TYPE_CONFIGURED=yes”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-setup-call-type:5] Set(“IAX2/out_italy-13703”, “CDR(calltype)=2”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-setup-call-type:6] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@default-trunk:4] Gosub(“IAX2/out_italy-13703”, “dynamic-routing-in,s,1(520)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@dynamic-routing-in:1] NoOp(“IAX2/out_italy-13703”, “Test if must to apply dynamic routing”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@dynamic-routing-in:2] Set(“IAX2/out_italy-13703”, “EXTERNAL_CALLER=520”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@dynamic-routing-in:3] Set(“IAX2/out_italy-13703”, “DYNROUTING_DM=0”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@dynamic-routing-in:4] GotoIf(“IAX2/out_italy-13703”, “1?gd”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (dynamic-routing-in,s,6)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@dynamic-routing-in:6] GotoIf(“IAX2/out_italy-13703”, “0?:rb”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (dynamic-routing-in,s,11)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@dynamic-routing-in:11] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@default-trunk:5] Goto(“IAX2/out_italy-13703”, “incoming-calls,445,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (incoming-calls,445,1)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@incoming-calls:1] NoOp(“IAX2/out_italy-13703”, “INBOUND_ROUTE: FROM_SPAIN”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@incoming-calls:2] Set(“IAX2/out_italy-13703”, “CHANNEL(language)=it”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@incoming-calls:3] Set(“IAX2/out_italy-13703”, “CHANNEL(musicclass)=default”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@incoming-calls:4] Gosub(“IAX2/out_italy-13703”, “sub-set-call-vars,s-incoming,1(520,445,c38e1aa7f37853e4)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-incoming@sub-set-call-vars:1] NoOp(“IAX2/out_italy-13703”, “Setting Incoming Call Vars”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-incoming@sub-set-call-vars:2] Set(“IAX2/out_italy-13703”, “__INCOMING_SOURCE=520”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-incoming@sub-set-call-vars:3] Set(“IAX2/out_italy-13703”, “__INCOMING_DESTINATION=445”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-incoming@sub-set-call-vars:4] Set(“IAX2/out_italy-13703”, “__INCOMING_TENANT=c38e1aa7f37853e4”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-incoming@sub-set-call-vars:5] Set(“IAX2/out_italy-13703”, “__CALL_SOURCE=520”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-incoming@sub-set-call-vars:6] Set(“IAX2/out_italy-13703”, “__CALL_DESTINATION=445”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-incoming@sub-set-call-vars:7] Set(“IAX2/out_italy-13703”, “__TENANT=c38e1aa7f37853e4”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-incoming@sub-set-call-vars:8] Gosub(“IAX2/out_italy-13703”, “app-incoming,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [app-incoming@sub-set-call-vars:1] NoOp(“IAX2/out_italy-13703”, “Incoming Call App CDR”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [app-incoming@sub-set-call-vars:2] GotoIf(“IAX2/out_italy-13703”, “1?:return”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [app-incoming@sub-set-call-vars:3] Set(“IAX2/out_italy-13703”, “CDR(source)=520”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [app-incoming@sub-set-call-vars:4] Set(“IAX2/out_italy-13703”, “CDR(tenant)=vitalpbx”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [app-incoming@sub-set-call-vars:5] Set(“IAX2/out_italy-13703”, “CDR(destination)=445”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [app-incoming@sub-set-call-vars:6] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-incoming@sub-set-call-vars:9] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@incoming-calls:5] Set(“IAX2/out_italy-13703”, “ICALL=yes”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [445@incoming-calls:6] Goto(“IAX2/out_italy-13703”, “cos-all,100,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (cos-all,100,1)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@cos-all:1] NoOp(“IAX2/out_italy-13703”, “More than on digit pattern”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@cos-all:2] Gosub(“IAX2/out_italy-13703”, “s,1(100)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@cos-all:1] Set(“IAX2/out_italy-13703”, “EXTENSION=100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@cos-all:2] NoOp(“IAX2/out_italy-13703”, “Dialing 100 from 520”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@cos-all:3] Gosub(“IAX2/out_italy-13703”, “sub-set-global-vars,s,1(100,parking-1)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-global-vars:1] NoOp(“IAX2/out_italy-13703”, “Setting Global Vars”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-global-vars:2] Set(“IAX2/out_italy-13703”, “__PICKUPMARK=100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-global-vars:3] Set(“IAX2/out_italy-13703”, “__PARKINGLOT=parking-1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-global-vars:4] Set(“IAX2/out_italy-13703”, “__DYNAMIC_FEATURES=custom-features”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-global-vars:5] Set(“IAX2/out_italy-13703”, “ICALL=no”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-global-vars:6] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@cos-all:4] Gosub(“IAX2/out_italy-13703”, “sub-set-call-vars,s,1(c38e1aa7f37853e4,100,1,cos-all,ARS-all)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-call-vars:1] NoOp(“IAX2/out_italy-13703”, “Setting Call Vars”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-call-vars:2] Set(“IAX2/out_italy-13703”, “_TENANT=c38e1aa7f37853e4”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-call-vars:3] Set(“IAX2/out_italy-13703”, “_CALL_DESTINATION=100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-call-vars:4] Set(“IAX2/out_italy-13703”, “_COS_ID=1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-call-vars:5] Set(“IAX2/out_italy-13703”, “_COS_NAME=cos-all”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-call-vars:6] Set(“IAX2/out_italy-13703”, “_ARS=ARS-all”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-call-vars:7] Set(“IAX2/out_italy-13703”, “CDR(tenant)=vitalpbx”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-call-vars:8] Set(“IAX2/out_italy-13703”, “CDR(destination)=100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-set-call-var
    s:9] Return(“IAX2/out_italy-13703”, “”) in new stack

    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@cos-all:5] Gosub(“IAX2/out_italy-13703”, “sub-construct-cid,s,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-construct-cid:1] NoOp(“IAX2/out_italy-13703”, “Building CID”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-construct-cid:2] Set(“IAX2/out_italy-13703”, “_CALL_SOURCE=520”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-construct-cid:3] GotoIf(“IAX2/out_italy-13703”, “0?return”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-construct-cid:4] Gosub(“IAX2/out_italy-13703”, “sub-get-device-tree,s,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-get-device-tree:1] NoOp(“IAX2/out_italy-13703”, “Configuring Device Tree”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-get-device-tree:2] Set(“IAX2/out_italy-13703”, “DEV_TECHNOLOGY=IAX2”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-get-device-tree:3] GosubIf(“IAX2/out_italy-13703”, “0?s-local,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-get-device-tree:4] GotoIf(“IAX2/out_italy-13703”, “0?return”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-get-device-tree:5] GotoIf(“IAX2/out_italy-13703”, “0?pjsip”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-get-device-tree:6] GotoIf(“IAX2/out_italy-13703”, “0?:digital”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (sub-get-device-tree,s,12)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-get-device-tree:12] Set(“IAX2/out_italy-13703”, “DEV_USER=out_italy”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-get-device-tree:13] Set(“IAX2/out_italy-13703”, “INTERFACE=IAX2/out_italy”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-get-device-tree:14] Set(“IAX2/out_italy-13703”, “DEV_TREE=devices/IAX2/out_italy”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-get-device-tree:15] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-construct-cid:5] GotoIf(“IAX2/out_italy-13703”, “0?return”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-construct-cid:6] Set(“IAX2/out_italy-13703”, “_CALL_SOURCE=520”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-construct-cid:7] ExecIf(“IAX2/out_italy-13703”, “0?Set(CALLERID(all)=)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-construct-cid:8] Set(“IAX2/out_italy-13703”, “_CID_CONSTRUCTED=yes”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-construct-cid:9] NoOp(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-construct-cid:10] Set(“IAX2/out_italy-13703”, “CDR(source)=520”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-construct-cid:11] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@cos-all:6] Gosub(“IAX2/out_italy-13703”, “set-global-tenant-vars,s,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:1] NoOp(“IAX2/out_italy-13703”, “Setting Global Vars for vitalpbx Tenant”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:2] Set(“IAX2/out_italy-13703”, “__TENANT_PATH=c38e1aa7f37853e4”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:3] Set(“IAX2/out_italy-13703”, “__TENANT_PREFIX=”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:4] Set(“IAX2/out_italy-13703”, “__QUEUE_AGENTS_CONTEXT=queue-call-to-agents”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:5] Set(“IAX2/out_italy-13703”, “__FOLLOWME_CONTEXT=ext-followme”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:6] Set(“IAX2/out_italy-13703”, “__HINTS_CONTEXT=extension-hints”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@set-global-tenant-vars:7] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@cos-all:7] NoOp(“IAX2/out_italy-13703”, “Check if is an Emergency Call”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@cos-all:8] GotoIf(“IAX2/out_italy-13703”, “0?emergency-calls,100,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@cos-all:9] Gosub(“IAX2/out_italy-13703”, “sub-lockphone-check,s,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-lockphone-check:1] NoOp(“IAX2/out_italy-13703”, “SUB: LOCK PHONE CHECK”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-lockphone-check:2] GotoIf(“IAX2/out_italy-13703”, “1?unlock”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (sub-lockphone-check,s,12)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-lockphone-check:12] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@cos-all:10] Gosub(“IAX2/out_italy-13703”, “sub-local-dialing,s,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-local-dialing:1] NoOp(“IAX2/out_italy-13703”, “Trying to determine if is a local extension”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-local-dialing:2] GotoIf(“IAX2/out_italy-13703”, “1?:return”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-local-dialing:3] Goto(“IAX2/out_italy-13703”, “100,1”) in new stack
    [2
    019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (sub-local-dialing,100,1)

    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:1] NoOp(“IAX2/out_italy-13703”, “Dialing Local Extension”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:2] Gosub(“IAX2/out_italy-13703”, “sub-setup-call-type,s,1(internal)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-setup-call-type:1] NoOp(“IAX2/out_italy-13703”, “Determinating Call Type”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-setup-call-type:2] GotoIf(“IAX2/out_italy-13703”, “1?return”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (sub-setup-call-type,s,5)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-setup-call-type:5] Set(“IAX2/out_italy-13703”, “CDR(calltype)=2”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-setup-call-type:6] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:3] Set(“IAX2/out_italy-13703”, “_DESTINATION_STATE=NOT_INUSE”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:4] Set(“IAX2/out_italy-13703”, “_DESTINATION_NUMBER=100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:5] Set(“IAX2/out_italy-13703”, “_DESTINATION_COS_NAME=cos-all”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:6] Gosub(“IAX2/out_italy-13703”, “sub-check-cos-privacy,s,1(cos-all,1,cos-all)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-cos-privacy:1] NoOp(“IAX2/out_italy-13703”, “Checking Privacy of CoS: cos-all”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-cos-privacy:2] GotoIf(“IAX2/out_italy-13703”, “0?:no_local”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (sub-check-cos-privacy,s,15)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-cos-privacy:15] NoOp(“IAX2/out_italy-13703”, “No Local Call, Allow any CoS”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-cos-privacy:16] Goto(“IAX2/out_italy-13703”, “return”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (sub-check-cos-privacy,s,22)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-cos-privacy:22] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:7] Set(“IAX2/out_italy-13703”, “DIAL_STRING=SIP/100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:8] Set(“IAX2/out_italy-13703”, “DB(c38e1aa7f37853e4/LASTCALLER/100)=520”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:9] Set(“IAX2/out_italy-13703”, “IGNORE_DIVERSIONS=”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:10] Set(“IAX2/out_italy-13703”, “QUEUE_CALL=”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:11] GosubIf(“IAX2/out_italy-13703”, “0?sub-queue-members,s,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:12] GosubIf(“IAX2/out_italy-13703”, “0?:sub-check-diversions,s,1(predialing)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-diversions:1] NoOp(“IAX2/out_italy-13703”, “Checking diversions for extension 100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-diversions:2] GosubIf(“IAX2/out_italy-13703”, “0?:return”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-diversions:6] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-diversions:3] Set(“IAX2/out_italy-13703”, “__CALL_ORIGIN=diversions”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-diversions:4] Set(“IAX2/out_italy-13703”, “__DIVERSION_ORIGIN=100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-diversions:5] Gosub(“IAX2/out_italy-13703”, “s-predialing,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-predialing@sub-check-diversions:1] NoOp(“IAX2/out_italy-13703”, “Diversions on pre-dialing”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-predialing@sub-check-diversions:2] GosubIf(“IAX2/out_italy-13703”, “0?:diversion-testing,1(Do not Disturb,DND,,,dnd)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [diversion-testing@sub-check-diversions:1] NoOp(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [diversion-testing@sub-check-diversions:2] GotoIf(“IAX2/out_italy-13703”, “0?:next-diversion”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (sub-check-diversions,diversion-testing,26)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [diversion-testing@sub-check-diversions:26] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-predialing@sub-check-diversions:3] Gosub(“IAX2/out_italy-13703”, “diversion-testing,1(Call Forward Immeditely,CFI,,,toggle_cfi)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [diversion-testing@sub-check-diversions:1] NoOp(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [diversion-testing@sub-check-diversions:2] GotoIf(“IAX2/out_italy-13703”, “0?:next-diversion”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (sub-check-diversions,diversion-testing,26)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [diversion-testing@sub-check-diversions:26] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-predialing@sub-check-diversions:4] GosubIf(“IAX2/out_italy-13703”, “0?:diversion-testing,1(Boss Secretray,BOSS,,,boss_secretary)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [diversion-testing@sub-check-diversions:1] NoOp(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [diversion-testing@sub-check-diversions:2] GotoIf(“IAX2/out_italy-13703”, “0?:next-diversion”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (sub-check-diversions,diversion-testing,26)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [diversion-testing@sub-check-diversions:26] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-predialing@sub-check-diversions:5] GosubIf(“IAX2/out_italy-13703”, “0?:diversion-testing,1(Personal Assistant,PEA,sub-personal-assistant,s,1)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [diversion-testing@sub-check-diversions:1] NoOp(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [diversion-testing@sub-check-diversions:2] GotoIf(“IAX2/out_italy-13703”, “0?:next-diversion”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (sub-check-diversions,diversion-testing,26)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [diversion-testing@sub-check-diversions:26] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s-predialing@sub-check-diversions:6] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-check-diversions:6] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:13] GotoIf(“IAX2/out_italy-13703”, “0?post-dial”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:14] Gosub(“IAX2/out_italy-13703”, “parse-dial-string,s,1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:1] NoOp(“IAX2/out_italy-13703”, “Parsing dial string: SIP/100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:2] Set(“IAX2/out_italy-13703”, “NEW_DIAL_STRING=”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:3] Set(“IAX2/out_italy-13703”, “COUNTER=1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:4] Set(“IAX2/out_italy-13703”, “CURRENT_DEVICE=SIP/100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:5] While(“IAX2/out_italy-13703”, “1”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:6] Set(“IAX2/out_italy-13703”, “TECHNOLOGY=SIP”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:7] Set(“IAX2/out_italy-13703”, “USER=100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:8] GotoIf(“IAX2/out_italy-13703”, “0?:regular”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (parse-dial-string,s,11)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:11] Set(“IAX2/out_italy-13703”, “PARSED_DEV=SIP/100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:12] GotoIf(“IAX2/out_italy-13703”, “1?:concatenate”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:13] Set(“IAX2/out_italy-13703”, “NEW_DIAL_STRING=SIP/100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:14] Goto(“IAX2/out_italy-13703”, “next”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (parse-dial-string,s,17)
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:17] Set(“IAX2/out_italy-13703”, “COUNTER=2”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:18] Set(“IAX2/out_italy-13703”, “CURRENT_DEVICE=”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:19] EndWhile(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:5] While(“IAX2/out_italy-13703”, “0”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:20] NoOp(“IAX2/out_italy-13703”, “New dialstring: SIP/100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:21] Set(“IAX2/out_italy-13703”, “DIAL_STRING=SIP/100”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@parse-dial-string:22] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:15] NoOp(“IAX2/out_italy-13703”, “Configuring Dial Settings”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:16] Set(“IAX2/out_italy-13703”, “RING_TIME=60”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:17] Set(“IAX2/out_italy-13703”, “RING_TIME=60”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:18] Set(“IAX2/out_italy-13703”, “RING_TIME=60”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:19] Set(“IAX2/out_italy-13703”, “DIAL_OPTIONS=r”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:20] Set(“IAX2/out_italy-13703”, “DIAL_OPTIONS=r”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:21] GotoIf(“IAX2/out_italy-13703”, “0?:answermode”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (sub-local-dialing,100,25)

    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:25] Set(“IAX2/out_italy-13703”, “ANSWER_MODE=disable”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:26] Set(“IAX2/out_italy-13703”, “ANSWER_MODE=disable”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:27] ExecIf(“IAX2/out_italy-13703”, “0?Macro(intercom)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:28] Set(“IAX2/out_italy-13703”, “IS_HOT_DESK=no”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:29] Set(“IAX2/out_italy-13703”, “MOH_CLASS=ringback”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:30] GosubIf(“IAX2/out_italy-13703”, “0?sub-set-moh,s,1(ringback)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:31] GotoIf(“IAX2/out_italy-13703”, “0?busy-here”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:32] Set(“IAX2/out_italy-13703”, “FORCE_RECORDING=no”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:33] Set(“IAX2/out_italy-13703”, “DIAL_OPTIONS=rU(sub-call-recording^c38e1aa7f37853e4^520^100^no)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:34] Set(“IAX2/out_italy-13703”, “__TRANSFERED_CALL=TRUE”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] pbx.c: Executing [100@sub-local-dialing:35] Dial(“IAX2/out_italy-13703”, “SIP/100,60,rU(sub-call-recording^c38e1aa7f37853e4^520^100^no)”) in new stack
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] netsock2.c: Using SIP RTP TOS bits 184
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] netsock2.c: Using SIP RTP CoS mark 5
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] app_dial.c: Called SIP/100
    [2019-07-08 17:26:25] VERBOSE[20845][C-000002ec] app_dial.c: SIP/100-00001451 is ringing
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Spawn extension (sub-local-dialing, 100, 35) exited non-zero on ‘IAX2/out_italy-13703’
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Executing [h@sub-local-dialing:1] NoOp(“IAX2/out_italy-13703”, “Finishing the call”) in new stack
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Executing [h@sub-local-dialing:2] NoCDR(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Executing [h@sub-local-dialing:3] GosubIf(“IAX2/out_italy-13703”, “0?dynamic-routing-connected,s,1(CANCEL,520)”) in new stack
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Executing [h@sub-local-dialing:4] GotoIf(“IAX2/out_italy-13703”, “0?call_ended”) in new stack
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Executing [h@sub-local-dialing:5] GosubIf(“IAX2/out_italy-13703”, “0?wake-up-no-answered,s,1”) in new stack
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Executing [h@sub-local-dialing:6] Gosub(“IAX2/out_italy-13703”, “sub-call-completion-check,s,1”) in new stack
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-call-completion-check:1] NoOp(“IAX2/out_italy-13703”, “FEATURE: CALL COMPLETION CHECK”) in new stack
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-call-completion-check:2] Set(“IAX2/out_italy-13703”, “CC_MODE=none”) in new stack
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-call-completion-check:3] Set(“IAX2/out_italy-13703”, “CC_MODE=none”) in new stack
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-call-completion-check:4] Set(“IAX2/out_italy-13703”, “CC_MODE=none”) in new stack
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-call-completion-check:5] GotoIf(“IAX2/out_italy-13703”, “1?end”) in new stack
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx_builtins.c: Goto (sub-call-completion-check,s,17)
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Executing [s@sub-call-completion-check:17] Return(“IAX2/out_italy-13703”, “”) in new stack
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] pbx.c: Executing [h@sub-local-dialing:7] NoOp(“IAX2/out_italy-13703”, “Call ended”) in new stack
    [2019-07-08 17:26:29] VERBOSE[20845][C-000002ec] chan_iax2.c: Hungup ‘IAX2/out_italy-13703’

     

     

     

    When 

    0
Viewing 3 replies - 1 through 3 (of 3 total)
  • Replies
    pdifeo
    Participant
    Up
    0
    Down

    Maybe I solved changing CoS to All Permission. But I cannot test before tomorrow morning. 

    My solution it’s right ?

    0
    Up
    0
    Down

    Yes, that is the right solution, when you switch the trunk context(CoS) from default to an existing class of service, the calls are not routed through the inbound routes but sent directly to the configured CoS in the trunk.

    0
    pdifeo
    Participant
    Up
    0
    Down

    Hi,

    all works fine. Thank you.

    0
Viewing 3 replies - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.