› VitalPBX Community Support › General Discussion › webinterface problem
On one of my vitalpbx servers i found a mystic problem
the http access is different then over https see screenshot
Remember that the port to display the data in the panel in https is different than in httpd.
http: 3000 TCP
https: 3005 TCP
Check your firewall.
i mean the normal webinterface not the api
The VitalPBX comes with two websockets for the dashboard
HTTP: 3000
HTTPS: 3005
sorry got an error on http://ip:3000
You must open the port 3005 on your firewall (On your router or VPS firewall) to be able to seed the dashboard over HTTPS.
sorry i don’t understand http is port 80 and https 433 what do these two ports have to do with it now
firewall on all sites are off
Assuming there is a firewall between your PC and the PBX, you need to allow the ports mentioned above.
my server are behind an vpn and on these there are no blocks
any other application are working trouble free on my vpns and on proxmox
its a stange behavor
what is happening when i change the port from 3005 to 3006 for testing
You don’t need to change any ports.
You need to make sure that the ports mentioned above is allowed on the VPN connection.
You may want to do a packet capture to see what it happening.
Posted by: @max202 the http access is different then over https see screenshot
Seems that you are using the stock self-signed server certificate for https but no modern web browser accept websokets reponse from untrusted sources.
Open web developer tools -> network in mozillla firefox… hopefully you will see the error.
I found the mistakeit is because of firefox with chrome it works
Posted by: @max202 I found the mistakeit is because of firefox with chrome it works
it would work with Firefox as well if you would use a lets encrypt certificate for example.
.
.
