novapcjau

Forum Replies Created

Viewing 15 replies - 1 through 15 (of 128 total)
  • Replies
  • novapcjau
    Participant
    Up
    1
    Down
    in my case i am using the IAX for it is accurate?
    0
    novapcjau
    Participant
    Up
    1
    Down
    would it be here for example?
    Attachments:
    You must be logged in to view attached files.
    0
    novapcjau
    Participant
    Up
    1
    Down
    Could you give me the places to make the change please?
    0
    novapcjau
    Participant
    Up
    0
    Down
    hello, Rivera thanks for your quick reply.

    I have 2 doubts. the first one I tried in Firewall Services, to change the protocols of PJSIP and SIP I tried to invert to try to solve my RTP problem.
    I did the procedure via GUI and it didn’t work if you can see later if this is working please.
    2 ° You would have some more direct suggestion on how to solve this issue of RTP because this is disturbing me a lot in some internet works normal in others is a side without sound.
    About NAT I only found it in the network SIP settings so I enabled Force, Comedia has any more direct suggestions for me to do more tests and try to solve please?

    Attachments:
    You must be logged in to view attached files.
    0
    • in reply to: WEBRTC
    novapcjau
    Participant
    Up
    0
    Down
    version 3 of VitalPBX does it still work with WEBRTC SIPML5?
    0
    • in reply to: WEBRTC
    novapcjau
    Participant
    Up
    0
    Down
    Hello I managed to resolve the previous error, but after making all the settings as instructed in the manual, when trying to connect, report the error of unauthorized, the password and data are all ok.

    Version 3.0 still supports Doublango.org/sipml5/

     

    • This reply was modified 11 months, 3 weeks ago by novapcjau.
    Attachments:
    You must be logged in to view attached files.
    0
    • in reply to: WEBRTC
    novapcjau
    Participant
    Up
    0
    Down
    I’m trying to reproduce like the manual that I put the link below if you look at the image it shows that you have to return that message

     

     

     

    Attachments:
    You must be logged in to view attached files.
    0
    • in reply to: WEBRTC
    novapcjau
    Participant
    Up
    0
    Down
    is no longer available in this mode for a version 3 of vitalpbx?
    0
    • in reply to: Call 0800
    novapcjau
    Participant
    Up
    0
    Down

    would I have the correct standard that I would normally use for 0800 so that I could use and test it please?

    0
    • in reply to: Call 0800
    novapcjau
    Participant
    Up
    0
    Down

    I did a test with several types of patterns for free connections, but none worked.
    Always the message that the number does not exist

    0
    • in reply to: Call 0800
    novapcjau
    Participant
    Up
    0
    Down

    @ing-joserivera26

    Hey, I saw that the VoIP operator told me it has to be 55800

    would it stay that way?

     

     

    0
    novapcjau
    Participant
    Up
    0
    Down

    Thank you, I made a new certificate and it worked correctly.

    0
    novapcjau
    Participant
    Up
    0
    Down

    I noticed that the backup of the recordings are only last month not bursting 500mb this is due to the limit already set or some bug?

     

    I made a manual backup by filezilla of the monitor folder and restored in place there the recordings were normal.

    0
    novapcjau
    Participant
    Up
    0
    Down

    @ing-joserivera26

    Yes I did the backup with the recordings it has almost 500mb.

    0
    novapcjau
    Participant
    Up
    0
    Down

    Hello, I restored a backup both by GUI and command in putty both restore Backup but do not link the recordings on CDR being unable to hear the recordings by GUI on CDR.

    0
Viewing 15 replies - 1 through 15 (of 128 total)