Fast configuring of VitalPBX in Raspberry Pi 3 B+

Today we will be guiding you step by step throughout the installation process of VitalPBX in Raspberry Pi 3 B +

Read our tutorials and guides on how to implement new tools and technologies for your business with VitalPBX here.

For less than US $ 80.00 you can have VitalPBX with all its functions and with great capacity in a Raspberry Pi 3 B +

Next, I will follow them:

1.- Buy a Raspberry Kit that meets our requirements, we recommend Amazon. We perform the Test with the Kit shown in the following image:

2.- Download the image of Centos 7 for Raspberry PI, in Google write “Centos 7 Raspberry PI download”. The correct image is the one that says “CentOS-Userland-7-armv7hl-RaspberryPI-Minimal-XXXX-sda.raw.xz”.

Actual Download Link:

Centos 7 Raspberry PI Minimal Pi 3B+1908

Centos 7 Raspberry PI Minimal Pi 4 1908

Then unzip the file, and we will have a resulting .raw file, which we will flash in our SD with the Echer program.

https://www.balena.io/etcher/

Note: If we had any problem recognizing the partitions of our SD because we had already used it, we must delete the partitions manually with Windows Disk Management.

3.- Now we introduce the SD card in the slot and turn on the Raspberry, which will start to install and maybe restart several times.
Once the installation is complete, the credentials to enter are the following:
User: root
Password: centos

4.- Automatically resize your / partition, just type the following (as root user):

[root@localhost ~]# /usr/bin/rootfs-expand

5.- If we are not going to use wireless adapter or bluetooth. Disabling the devices will increase security and reduce electrical / heat if not significantly.

[root@localhost ~]# 

Add

#wifi
blacklist brcmfmac
blacklist brcmutil

#bt
blacklist btbcm
blacklist hci_uart

6.- In this step we will proceed to install VitalPBX with the following commands:

[root@localhost ~]# yum install wget -y
[root@localhost ~]# wget https://raw.githubusercontent.com/VitalPBX/raspberry/master/install.sh
[root@localhost ~]# chmod +x install.sh
[root@localhost ~]# ./install.sh

Note:For now the dashboard is shown in passive mode, that is, it has to be reloaded to update the data.

Learn more about VitalPBX, our services and how we can help you achieve your goals in our official website.

0
March 1, 2019

Leave a Reply

Your email address will not be published. Required fields are marked *